High resolution image of GTS chassis

jorojin
Master Sergeant
Posts: 296
Joined: Wed Jun 08, 2016 12:42 pm
Location: North East England

High resolution image of GTS chassis

Postby jorojin » Tue Dec 19, 2017 8:02 am

I was wanting to get an A3 size metal sign for my garage showing the attached photo Image
But the sign manufacturer says that the image isn't high enough resolution and if enlarged it "pixilates" . Does anyone know where I can get a high res copy?

User avatar
Arno
Staff Sergeant
Posts: 81
Joined: Tue Nov 08, 2005 4:10 am
Location: Haiger, Germany
Contact:

Re: High resolution image of GTS chassis

Postby Arno » Tue Dec 19, 2017 12:42 pm

Hi Frank, I have a high resolution photo of the GTS but not the frame, only the compl. bike, in green and red.

jorojin
Master Sergeant
Posts: 296
Joined: Wed Jun 08, 2016 12:42 pm
Location: North East England

Re: High resolution image of GTS chassis

Postby jorojin » Wed Dec 20, 2017 9:17 am

I had forgotten that I had a copy of the original sales brochure and the above photo is from there. I have now high resolution scanned it sent it off to the sign manufacturer http://www.vintagemetalsign.co.uk/ and they will make a metal sign with "Yamaha GTS1000 1993 -1996" along the black strip at the bottom and a faint watermark of the Yamaha tuning fork symbol in the background for £26 including postage. The sign will be 500mm x 300mm and I can't wait to add it to the photos and VR46 memorabilia on my garage wall. If anyone else is interested in one get in touch with Andy Cairney at vintagemetalsign@yahoo.com or phone him on 00 44 (0) 7477082497.

User avatar
Notteryd
Staff Sergeant
Posts: 60
Joined: Thu Jul 16, 2009 8:33 am
Location: Sweden, Växjö

Re: High resolution image of GTS chassis

Postby Notteryd » Thu Dec 21, 2017 6:29 am

Hi
sounds interesting:) can you please post a photo of the sign here once it´s ready?
Merry christmas!
//Magnus

jorojin
Master Sergeant
Posts: 296
Joined: Wed Jun 08, 2016 12:42 pm
Location: North East England

Re: High resolution image of GTS chassis

Postby jorojin » Fri Dec 22, 2017 1:19 pm

Got the metal sign this morning, quick turn around, only 2 days since ordering. The sign is 18"x12" with holes in each corner for wall fixing. The picture quality is reasonable considering the small size of the photo I scanned to blow up to this size, very pleased. :D :clap: :coffee:

Image


Return to “Information & "How To's"”

Who is online

Users browsing this forum: No registered users and 1 guest